备注：
些套装不含ZL支架（门与门框垂直）和U型支架（玻璃门），请在下单前参照安装图片，如需要，请在店内另购。
套装清单：
一体门禁主机1个、280KG防水磁力锁一套、3A电源一个、出门开关一个、ID激光刻码扣卡5个。
本套门禁适用于木门，铁门，玻璃门，防火门，安装简便，只需有基础的电工常识即可安装，比如连接电线正负极、拧螺丝、布电线等基础工作。
详细安装步骤和电路图在说明书中有描述，如在安装过程中遇到问题可以随时联系本店寻求技术支持！
Notice:
This set don't include ZL bracket and U bracket,please check befor placing order.if needs,please buy its in the store.
Specification:
1.Integrated access control
·Work Voltage:Dc 12V
·Open Lock Current:≤0.1A
·User Capacity: 12,000 users
·Inductive Distance:5～15mm
·Card type:EM/ID
.Frequency:125KHz
·Size:120*78*22mm
·Weight:0.22kg
Function:
·Supporting card,with master card
·Offline work
·Power off data protection function
·Connect to the door bell by wire or wireless with accordance to customer requirement and support the switch for opening the door
.Can connect WG reader
2.Lock control
·Can reduce the access controller’s load, interference, save wiring and reduce failure risks
·Set NC / NO outputs, can control various types of electric locks (+ NO and-3COM electric lock ·pick, even if the long-term power to the electric lock electric lock does not burn)
·based delay control circuit, lock time can be arbitrarily adjusted in the 0-10 seconds
·AC Input: Standard AC220V 50HZ
·Output Voltage: DC 12V,5A
·Size:182*80*70mm
·Set NC / NO outputs, can control various types of electric locks (+ NO and-3COM electric lock ·pick, even if the long-term power to the electric lock electric lock does not burn)
·based delay control circuit, lock time can be arbitrarily adjusted in the 0-10 seconds
·AC Input: Standard AC220V 50HZ
·Output Voltage: DC 12V,5A
·Size:182*80*70mm
3.Magnetic lock
.Waterproof
.Lock Size:250×53×34.3mm
.Suction Force:280kg/600Lsb
.Working Voltage:12V
.Working Current:350mA
.Application:power lock/with Locking Status
Package Included:
.ID access controlx1
.280kg waterproof EM lockx1
.3A power supplyx1
.Exit buttonx1
.Key cardx5
安装示意图（Fixing diagram as follow）：
